| Product characteristics | |
| Output signal | analog signal; (configurable) | |
 Measuring range | -1...4 bar | -14.5...58 psi | -100...400 kPa | |
| Process connection | threaded connection G 1 external thread Aseptoflex Vario | |
| Application | |
| System | gold-plated contacts | |
| Measuring element | ceramic-capacitive pressure measuring cell | |
| Application | food and beverage industry | |
| Media | viscous media and liquids with suspended particles; liquids and gases | |
| Medium temperature | [°C] | | | -25...125; (150 max. 1h) | |
| Min. bursting pressure | | 100 bar | 1450 psi | 10000 kPa | |
| Pressure rating | | 30 bar | 435 psi | 3000 kPa | |
| Vacuum resistance | [mbar] | | -1000 | |
| Type of | pressure | | | | relative pressure; vacuum | |
| No dead space | | yes | |
MAWP (for applications
according to CRN) | [bar] | | 30 | |
| Electrical data | |
| Operating voltage | [V] | | 18...30 DC | |
| Min. insulation resistance [MΩ] | | 100; (500 V DC) | |
| Protection class | | III | |
| Reverse polarity protection | | | | yes | |
| Integrated | watchdog | | | | yes | |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — PM1705-00 — | |
| |
| PM1705 | |
| Electronic pressure sensor | |
| PM-004-REA01-E-ZVG/US | |
| 2-wire | |
Current consumption [mA] 3.5...21.5
Power-on delay time [s] 1 | |
| 3-wire | |
| Current consumption | [mA] | | < 45 | | |
| Power-on delay time [s] | | 0.5 | |
| Inputs / outputs | |
| Number of inputs and outputs | Number of analog outputs: 1 | |
| Outputs | |
| Total number of outputs | 1 | | |
| Output signal | analog signal; (configurable) | |
| Number of analog outputs | | 1 | |
| Analog current output | [mA] | | 4...20; (scalable) | |
| Max. load | [Ω] | | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) | |
| Short-circuit proof | | | yes | |
| Overload protection | | yes | |
| Measuring/setting range | |
| Measuring range | | -1...4 bar | -14.5...58 psi | -100...400 kPa | |
| Analog start point | | -1...3.2 bar | -14.5...46.4 psi | -100...320 kPa | |
| Analog endpoint | | -0.2...4 bar | -2.9...58 psi | -20...400 kPa | |
| Insteps of | | 0.02 bar | 0.05 psi | 0.2 kPa | |
| Factory setting | | | ASP = 0.0 bar | AEP = 4.0 bar | |
| Accuracy / deviations | |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | |
| Characteristics deviation | < ± 0,2 (DIN EN 61298-2); (incl. zero point and
span error, non-linearity, hysteresis ; Turn down 1:1) | |
| | [% of the span] | | |
Linearity deviation
[% of the span] | | < ± 0,15; (Turn down | 1:1) | |
Hysteresis deviation
[% of the span] | | < ± 0,15; (Turn down | 1:1) | |
| | | | | |
Long-term stability
[% of the span] | | < ± 0,1; (Turn down 1:1; per year) | |
Temperature coefficient zero
point
[% of the span / 10 K] | | < ± 0,05; (0...70 °C) | |
Temperature coefficient span
[% of the span / 10 K] | | < ± 0,15; (0...70 °C) | |
| Reaction times | |
| Damping for the analog | [s] | | 0...4 | | |
| output dAA | | | |
| 2-wire | |
| Step response time analogue | [ms] | | 30 | | |
| output | | | |
| 3-wire | |
| Step response time analogue | [ms] | | 7 | | |
| output | | | |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — PM1705-00 — | |
| |
| PM1705 | |
| Electronic pressure sensor | |
| PM-004-REA01-E-ZVG/US | |
| Interfaces | |
| Communication interface | IO-Link | | |
| Transmission type | COM2 (38,4 kBaud) | |
| IO-Link revision | 1.1 | | |
| IO-Link device ID | 664 d / 00 02 98 h | |
| Profiles | | Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) | |
| SIO mode | | no | |
| Required master port class | | A | |
| Process data analogue | | 3 | |
| Min. process cycle time [ms] | | 3.2 | |
| Operating conditions | |
| Ambient temperature [°C] | -25...80 | | |
Storage temperature [°C] -40...100
Protection IP 67; IP 68; IP 69K | |
| Tests / approvals | |
| EMC | | DIN EN 61000-6-2 | | |
| | DIN EN 61000-6-3 | | |
| Shock resistance | | DIN EN 60068-2-27 | 50 g (11 ms) | |
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10...2000 Hz) | |
| MTTF [years] | | 323 | |
| Note on approval | | Factory certificate available as download at www.factory-certificate.ifm | |
| UL approval | | UL approval number | J021 | |
| Mechanical data | |
| Weight | [g] | | 282.5 | | |
| Material | | stainless steel (1.4404 / 316L); PBT | |
| | | | |
| Materials (wetted parts) | | ceramics (99.9 % Al2O3); PTFE; stainless steel
(1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4 | |
| Min. pressure cycles | | 100 million | |
| Tightening torque [Nm] | | 35 | |
| Process connection | | threaded connection G 1 external thread Aseptoflex Vario | |
